Stainless steel
such as kitchen equipment, general tensile materials, gas stoves, refrigerators, electrical appliances, washing machines, dryer microwave ovens, electronic components, steel pipes, decorative pipes, structural pipes, pipes, building materials, Re-grinding, elevators, interior and exterior decorative materials, windows, door materials, chemical equipment, heat exchangers, boilers, tanks, etc.
| dryer microwave ovens |
| electronic components |
| general tensile materials |
| refrigerators |
| washing machines |
| electrical appliances |
| gas stoves |
| kitchen equipment |
| steel pipes |
Would you like more information about laser marking and laser engraving metals?
Contact Us
Make the operation fastly
save more manpower
Ensure that the appearance of the board is intact
Improve the processing quality of the board
The stainless steel laser cutting machine belongs to the metal cutting machine, and its main cutting material is stainless steel. Due to the material properties of stainless steel, YAG gemstone laser tubes are most suitable. Stainless steel absorbs this laser very well.
1. The size of the beam after passing through the focus. The smaller the spot after the laser beam is collected, the higher the cutting precision, especially the smaller the slit, and the smallest spot can reach 0.01 mm. 2. The positioning accuracy of the workbench determines the repeatability of the cutting. The higher the precision of the workbench, the higher the precision of cutting 3. The greater the thickness of the workpiece, the lower the accuracy and the larger the slit. Since the laser beam is tapered, the slit is also tapered, and the stainless steel with a thickness of 0.3 mm is much smaller than the 2MM slit. 4, the workpiece material has a certain impact on laser cutting accuracy In the same case, the cutting stainless steel has higher cutting precision than aluminum, and the cutting surface is smoother.
Function of the Fiber Laser Cutting Machine
The fiber laser cutting machine can be used for both plane cutting and bevel cutting, and the edges are neat and smooth, which is suitable for high-precision cutting of metal sheets. It is an energy-saving and environmentally friendly new products with space saving and gas consumption and high photoelectric conversion rate.
Excellent beam quality and good cutting quality
Fast cutting speed and high production efficiency
No burr in the cutting, high cutting precision
Auto focus, easy to operate and maintain
Very low cost of use, cost-effective
Closed design, safe and pollution free
Fast cutting speed and high production efficiency
Function of the CO2 laser cutting machine
The CO2 laser cutting machine adopts a focusing mirror to focus the CO2 laser beam on the surface of the material to melt the material, while blowing the melted material with a compressed gas coaxial with the laser beam, and moving the laser beam and the material relative to each other along a certain trajectory to form a slit of a certain shape
The output continuous laser is to make the cutting section smoothest.
The laser cutting head does not contact with the surface of the material and no damage to the workpiece.
Can cut non-metallic materials and has a wide cutting range.
No need for molds, saving production costs.
Function of the fiber laser marking machine
Fiber laser marking machine, with the good beam quality. Its output center is 1064nm, the whole machine life is longer about 100,000 hours, compared with other types of laser markers. The electro-optical conversion efficiency is more than 28%, relative 2%-10% conversion efficiency of other types of laser marking machine. Besides that it has outstanding performance in energy saving and environmental protection.
Can process a variety of metal, non-metallic materials.
Belonging to non-contact processing, no damage to the product, no tool wear, good marking quality.
Thin laser beam is thin, small processing material consumption and the processing heat affected zone.
High processing efficiency, computer control, easy to automate
Stainless steel is used in a wide range of applications, such as kitchen equipment, general tensile materials, gas stoves, refrigerators, electrical appliances, washing machines, dryer microwave ovens, electronic components, steel pipes, decorative pipes, structural pipes, pipes, building materials, Re-grinding, elevators, interior and exterior decorative materials, windows, door materials, chemical equipment, heat exchangers, boilers, tanks, etc.
Why use laser equipment to cut stainless steel?
Stainless steel laser cutting process is fast, the product is good, and the cut is smooth without burrs. And because laser cutting does not need to touch the stainless steel surface, the product is not easily deformed.
